TV Server and HD Encoder connections

IT system connections

Power

IEC C14. Most units are auto-ranging, supporting 100-240 volts AC 50-60Hz

Console

DVI connector supporting DVI directly or HDMI via an appropriate adapter.

Network (LAN)

100/1000 Mb/s auto sensing network port for streaming of video to your network. 1000Mb/s (1Gb/s) connection is recommended.

Network (Engineer)

100/1000 Mb/s auto sensing network port, for local administration of the system.


Signal connections

DVB-S2

F-type RF coaxial connector

DVB-T2

TV Coaxial, aka Belling-Lee connector IEC 61169-2 radio-frequency coaxial connector of type 9,52.
Female sockets for signal input. Male sockets are available for "chain-on", but due to signal losses with each connector this practice is not recommended.
Each TV Coaxial input feeds two tuners, therefore a TV Server 4/DVBT2 will only require 2 coaxial inputs.

HDMI

Standard full size 19 pin type A HDMI socket.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us