Change resolution and power behaviour with the IR remote control

Changing the display resolution

You can change the display resolution of the IPTV 250m set-top box using special keycode combinations on the IR remote control, without the need to visit the settings page.

Inputting each sequence

To enact the change, tap each button from the displayed sequence in order on the remote.

Changing to 1080i 50

RED → 1 → 0 → 8 → 0 → GREEN

Changing to 1080p 50

RED → 1 → 0 → 8 → 0 → YELLOW

Changing to 720p 50

RED → 7 → 2 → 0 → GREEN

Changing to 576p 50

RED → 5 → 7 → 6 → YELLOW

Changing to PAL

RED → 5 → 7 → 6 → GREEN

Changing power button behaviour

You can also alter the function of the power button on the remote so that it puts the box into and out of standby mode.

Changing power mode

PWR → RED → GREEN → PWR